Thursday, 19 January 2017

Airfix ACW Wargaming - Artillery conversions

Some additions to the artillery..conversions using bods from the Airfix Waterloo British Artillery set.
Easy..remove the frilly bits on the jackets, replace the heads, paint and base.
I liked the look of the Sabres so I left them on.
Union.
The one moving the wheels ended up a bit defunct due to the basing.
Confederate
I know, White belts? Since I started this project I´ve found out a wee bit more about ACW uniforms etc but the White belts will remain. Anyway, they probably wouldn´t be carrying sabres, especially if they are servicing the gun. Historical accuracy? Pah I say :-)
A total of six guns and Now I´m looking for a couple more Limbers...although, a Little bird has told me, some may be on the way :-)
 


Tuesday, 10 January 2017

Airfix ACW Wargaming (Pt 5) - Artillery

Slowly it´s coming together. The Artillery finished....well, sort of.  I´ve got a couple more guns and Crews  so if I get some more limbers I´ll add some more to both batteries...3 per side Sounds like a good number.
The Gun Teams.
Bases for the Guns, 5cm´s per side. The individual bods, 12.5mm x 10mm
The nag for the commander for the Union Team is from the Airfix Foreign Legion set (1st issue) 
The Limbers.
One of the CSA Limbers has had a bod from the Airfix Wagon Train set  added.
EDIT....I´ve got an idea to "recruit" some other gunners from the Airfix range so I might as well add at least one more gun per side, irrespective of wether I can obtain more limbers.

Friday, 6 January 2017

Airfix ACW Wargaming - Cavalry completed

32 in total, 16 for the Union and 16 for the Confederacy.
Based on 2mm MDF board.
The Union Bods.
I kept one of the Standard bearers with the original flag..I didn´t have the heart to remove it.

Basing sizes,  according to the  Airfix American Civil War Wargaming book.

Infantry - single basing.  Frontage of 12.5mm with a 10mm depth. I´m basing them in pairs so a base will be 2.5cm´s wide with a 2cm depth.
Basically, appart from the artillery,  this is about all the basing advice the book gives so I´ve used the  12.5mm x 10mm as a Basis and "scaled it up" for the other arms.
Cavalry - 2 mounted bods per base =  width 5cm´s and depth 4 cm´s.
Individual mounted - Generals etc =  2.5cm´s by 4cm´s
Individual foot - Gunners etc = as per the Suggestion in the book, 12.5mm by 10mm
Artillery - A triangle with all 3 sides 5cm´s. The Limbers I´ve based at 4cm´s by 10cm´s.

Some of the bods were missing thier Sabres/sheaths so I replaced them with staples*. This was easier than I first thought. Luckily I recently  found a staple Cartridge (Here) which has  all the staples unformed, ie; not in the classic "U" shape but flat.
A Sabres I made a hole in the Hand with a pin and pushed the staple in, then cut it to length.
For the sheaths, I cut a staple to the correct length, heated it over a candle flame (Holding with a pair of tweezers) and simply "welded" it to the side of the bod.

*Using staples was mentioned in the "Bods and Generals" post.   There´s 5000 staples in the Cartridge so it will last a while

Sunday, 1 January 2017

Happy new year 2017

Here´s hoping 2017 is a less hectic across the world than 2016....
A bit of a Review of  production in 2016
Approximately  360 bods, 124 nags (with and without Mounted bods) and 9 carts.
                                                                                           
12 bods   woodland Indians Tecumseh                                                       
6 bods Hussite Camp 1  - Footfolk/workers (Pt 1)                                      
8 bods Hussite Camp 2 - Footfolk/ workers (Pt 2)                                        
6 bods and 8 nags    Hussite Camp 3 - Medieval horse Care                                    
1 bod, 2 wagons and 8 nags    - Hussite Camp 4 - Wagons                            
seated Knights                                                                                             
12 American Militia in Winter Dress 1812                                                    
3 bods and a cart - Medieval Camp followers - Finished                               
10 bods and 10 nags - European Mounted Men-at-Arms                               
12 bods and 12 nags - airfix US Cavalry -                                                    
4 riderless wargs                                                                                          
Airfix CSA Cavalry                                                                                     
1 bod and 7 mounted -  Crested Knights                                                      
5 bods, 2 wagons, 3 mules, a cow and a Bullock                                         
40 bods -  Medieval builders                                                                          
4 bods and 5 nags,- Mounted Teutonic Knights Command                          
4 bods - Goosey Goosey Gander                                                                 
1 bod and six nags - Teutonic Knights Pt2                                                     
2 bods and six nags   - Teutonic Knights Pt3                                                
9 bods, 2 nags - Bannockburn                                                                      
18 bods, 2 nags and 2 mules - Teutonic infanty on the march                     
5 carts and 10 nags - Wagons for Bodstonia                                                  
26 orcs                                                                                                              
Teutonics restart       1 bod     2 nags                                                            
Norman Army Camp   27 bods    6 nags                                                         
Medieval guards on Duty    17 Bods                                             
Medieval guards resting     14 bods                                                                 
Medieval Alarm                13 bods                                                                  
Airfix Tarzan                    8 Bods                                                                    
60 airfix ACW bods, 32 Airfix ACW Cavalry, 3 guns, Crews  and limbers 

Other Bits and Bobs
Fort Sahara to monastery conversion
Roman Villa MK2
24 Beehives and 3 stands
StuH 42
Camping acessories and tents
3 ACW scratchbuilt houses
Airfix "What If"

What was planned for 2016 and what didn´t happen? Well, 4 of the 10 planned Projects actually got done but work  on the 1329 Teutonic dio took precedent and then the Airfix ACW wargame Project popped up....
Roman Villa
Finish the last 6 Seated Knights
Paint up a Hussite camp

Finish the Medieval / Bodstonian town (another 10 or so buildings)
Base the Medieval / BodstonianVillage
Build a 17th Cent Meeting house /Fort
Paint every pose of the Airfix Afrika Korps set...the Tarzan set was Chosen instead
Paint the Strelets Tecumseh set
Scratchbuild a "Medicus" wagon
and a couple of Weird and wonderfull scratchbuilds,

Plans for this year?
Continue work on both 1329 Teutonic dio and  the Airfix ACW wargame Project.
Wargame the ACW bods using the rules (with possible mild adaptions) from the Terry Wise book. ..this should actually happen.
Re-Boot Bodstonia. Those  Bodstonians have been getting on without me so it´s about time I had a look at what they are up to.


That will do for 2017 plans, As always, I´ll probably get side tracked into some other stuff as well.

Saturday, 31 December 2016

What if...

...after the 2nd WW, everyone had  signed up to genuine real and Lasting peace on earth? Not a cessation of hostilities for a short period while each and every side vied for new angles on causing friction in order to fill up the arms order books but a genuine   realisation we have the same Basic wants, needs, loves and fears and  work towards a bright future for humankind and the planet.
As part of this permanent peace, there would be no need for weapons, no tanks, no guns and  no need for war planes.
The swords would have to be made into ploughshares..or in this case, Spitfires into racing cars.
Wheels -  from a bashed up Siku post lorry
Axles - bits of  sprue from the original Airfix Spitfire kit
Suspension -  Florist wire wrapped around Pins
Headlights - two Pins with the bead type head, 1/3rd sliced off.
I left the wingstubs on as they make nice runningboards
The Inspiration for the  idea Comes from a Toy racing car from my collection..a Mercedes-Benz Racing Car (Dinky Toys 23c)  ....which is celebrating its 66th  birthday this year. It could be slightly older as They (Meccano LTD-Dinky) started making them in 1946, so just after  WWII  ;-)

Thursday, 22 December 2016

Airfix ACW Wargaming - Bods and Generals

A round up of recent  bits and pieces.

Union General
He has appeared in a previous post but now he´s got a Standard bearer alongside him. The bod is from the Artillery set, sabre sheath added by welding a staple to his side.
The flag...I haven´t a clue whose or what Regiment it is...Looks ok to me though :-)


Confederate General.
Top half from the Confederate infantry set, bottom half from the US cavalry set. His Standard bearer is also from the Artillery set.
As for the flag, it´s one I came across whilst looking for possible HQ flags,  General Robert E. Lee´s HQ Flag*

Pipers.
Both of them are from the  Airfix Guards Band set with head swops and staples added as Sabres.
They´ll get based as soon as I work out wether to have them as part of a Regiment or as add ons to a marching column.

Union officer.
Converted from the Airfix Cowboys set. Staples for sabre and sheath.

Artillery Flags
I´m not sure how or often the ACW artillery   used battle flags, wether they were carried near the battery, flown when they were on the march or to Signal a central Point like the HQ.
Anyways, I found a couple so it seemed a waste to not have them.
The CSA one I´m not sure about. It seems a bit too Long in comparison to it´s height..or have I made a mistake of using the reverse and front sides as one ?

*I know the flags are big but as I´ve said before..this aint no historical reproduction and I like big flags :-)

Sunday, 18 December 2016

Airfix ACW Wargaming (Pt4)

Two Batches of cavalry, one for the Union and one for the CSA. With the recent new recruits (HERE) I´ll be able to make up another two Units.
Then a bit of mix and matching and onto their bases they go.

The CSA have had a couple of head swops. Ok, anyone who has an idea about CSA cav (or, like me,  has looked at PSR) knows that the cavalry on both sides prefered the Hardee type hats but I reckon the use of hardee hats for the CSA cav makes them look more CSA looking....well it does to me.

Also, anyone who has an idea about CSA cav (or, like me,  has,  looked at the write up on this set at  PSR) knows These bods and thier nags (well, not so much the nags but the Equipment on them) that they are about as historically accurate as the film Gladiator, but this Project is old school. ...hence the big flag carried by the CSA Standard bearer...I like BIG flags!! :-D


In the distant past I´d have used a  small screwdriver heated over a candle to weld the pegs on the nags hooves (and sometimes my fingers..happy days) to the holes in the  bases. In most cases it never really Held for Long.
These days, I´m allowed Access to superglue to weld the pegs (and sometimes my fingers .. nothing changes)  to the bases.

I came up with a method  using thin metal wire "welded" to one of the supporting legs to attach the nags  as shown HERE . It´s a way more solid method of attaching them  than either of the "welding" methods but to use it on all the nags would be time consuming.

Some of the nags which were lacking their bases  have the same peg arrangement which fits  exactly to the bases from the Airfix Sherrif of Nottingham set  so they didn´t Need the Addition of metal Pins.

A bit more scenery,  some "snake fences" made using cut up coffee stirrers
I´ve mabe them in interlockable sections. The 8 (so far) have a total length, when locked together, of 1.6m. I was going to add the side stakes propping up the fence at the  intersections but that would mean they wouldn´t be joinable and as the stakes would stick out, theyéd be prone to damage.

Thursday, 8 December 2016

Airfix ACW - A bit of a Bargain

New recruits for the Airfix ACW Project bought at  the 42.Plastikfigurenbörse, Herne.
I haven´t counted them but it was a bit of a bargain, €15 for around about 500 bods, horses and wagons.
In the bags there´s the marching poses, 40 plus Union, 20 plus Confederacy, 20 1st issue airfix foriegn Legion which will end up as Zouaves. The bods from the first issue set compare better size wise and scupting to their ACW companions. Also a near complete set of US cavalry. The pile of Shooting, running etc will end up being used for/as conversions.

4 new artillery pieces plus two complete limbers. The limber with the broken trail I can use as a cassion and the spare wheels will come in usefull.
In the bag there´s a full set (including the accessories) of the Airfix Wagon Train set! A quick Stress test Shows None of this copy of the set is suffering from plastic rot!

Thursday, 1 December 2016

Airfix ACW Wargaming (Pt3)

Taking a bit of time off from painting the rank and file..Some conversions
A Union General. This one was a bit of a more complicated conversion than I´d intended but after rooting about in the bits box I found a similar conversion (seen HERE in glorious Humbrol enamels along with a few other early conversions) I´d made some 30 plus years ago so it  Counts as "old school"
Nag and legs from the Airfix US Cavalry set, Body from the Waterloo British artillery set and a small concession to the "Nothing but Airfix", head and hat from the Revell 30yrs war Swedish Infantry
CSA Musicians. The drums are made from bits of sprue..
The Drummer made using the odd running and waving pose. He Looks like he´s trying to ease something out...Wind?
CSA Standard bearers. I´m sure a lot of People have come up with These   (and other) ideas to create Standard bearers.
Flag poles - flower arranging wire
Flags - Printed

Another building, this time loosely based on General Meade's Headquarters (The Leister Farmhouse), Gettysburg.
As it´s a gaming Piece and not an historical reconstruction, I didn´t bother adding the steps at the front or the Windows at the sides and back. And look at the size of those shingles/tiles!!!! In reality Theyéd be what, 1.5metres wide and tall ? Still, it got the Roof decked in quick time  :-D

"Don´t worry Victoria, I´m sure it will all be over by Christmas"
Well, Big John may be being  a bit presumptive or he isn´t refering to this Christmas?

Monday, 21 November 2016

Airfix American Civil War Wargaming

It´s arrived !!!!!!!!!!!! :-)
Considering the Age of the book, it was produced in 1977, this copy is in excellent condition. Slight discolouration on the spine but no dog ears or Scribbles/stains on the pages.
Compared to what some copies are going for on Evil-bay etc,   I got this copy for a song.
Having a quick look through, the memories came flooding back! This and some of the airfix mag articles (when pocket Money allowed ) inspired many a table top (and carpet Level) battle.
On a later post devoted to the "Airfix ACW Wargaming " Project I write up the basing, movement, firing rules for  anyone interested.

And, an update on Smokey. She´s now had a slight Name Change to Ghost..but seeing as she is deaf (she can only very high tones) it makes no difference to her what her Name is.
She´s put on some weight and is more or less settled in.

Saturday, 12 November 2016

Airfix ACW Wargaming (Pt2)

All available guns finished. Due to "plastic Rot", I only had enough wheels left to put 4 together and some of those are missing parts of the spokes.
A Union gun Crew. These are some of my  conversions from over 30 years ago.
Top halves from the ACW set and 3 bottom halves from the Airfix Russian infantry set and one (far left) from the Union infantry set. Bases are painted up emerald green "old School"

I´ve now gone and ordered the book American Civil War Wargaming by Terry Wise so when it arrives, basing can start.
Both Crews for the CSA finished
and another Union gun Crew added
All 4 guns with Crews.
Note the twisted and or snapped spokes. The dreaded plastic rot? In some cases yes but some of the wheels are still very pliable and  I seem to remember (way back) that  the spokes on a lot of the airfix sets were twisted.
Right, if anyone actually misses thier target they get thier pay docked!

Tuesday, 1 November 2016

Airfix ACW Wargaming (Pt1)

As if I haven´t got enough to do, Hobbywise, the start of Another Project, this one based on Airfix ACW using just Airfix bods.
Why Airfix ACW? Simply cos I´ve got a few bods already finished and.........
..........and a few spares and..
,,,, the Airfix bods are easy to paint and, Rivet Counters beware,  the historical innacuracy of the bods  gives me a good excuse to say, Any historical accuracy is purely accidental.
Obviously they will be painted to represent both sides but I won´t be getting hung up on wether a CSA bod is wearing a tunic of  exactly the right tone of  Butternut Brown or a Union bod is wearing a Kepi or a Hardee hat. As Noted at PSR, these were intended as toys..and toys are meant for games and games should be fun..not a chore.

I´ll also be making some Conversions. I did so way back when I first got into wargaming/collecting but they will be as simple as I don´t want to get bogged down with the Project which usually gets me distracted into doing something else.

Any half decent looking battlefield Needs some bits of scenery  so first up a couple of generic farmhouses.
As this is supposed to be a fun  Old School  Project,  reliant on being cheap, quick  and easy, so everything about it, including any battlefield "decoration",  has to cost virtually nothing, be Basic, no excessive Detail or in depth historical accuracy, if it looks the part it´ll do and lastly,  durable.
Thin Card glued with PV

Roofing
Base painting                                                                  
Ridge tiles added
Windows, doors and windowsills added.
 
Chimneys made from high density foam
 
...and here´s a very inspirational blog.  20mm Crimean War Wargaming & Other Stuff
Bob is also doing an Airfix ACW Project called  Project Battle Cry & Airfix ACW.
The look he´s achieved is what I´m aiming for.